A:The 400 tons hydraulic jack cylinder and electric oil pump produced by Zhengzhou Gaode Equipment Co., Ltd have undergone strict quality control before leaving the factory, so they can display their good performance when they reach the unit.

A:In order to ensure the safety of the bridge after five years of new bridge construction in China, it is necessary to replace the rubber bearing with 150 tons synchronous lifting hydraulic jack. According to the beam structure of the bridge and the weight of the bridge, select the appropriate synchronous lifting hydraulic jack and determine the position of the synchronous jacking according to the needs.

A:The Accessories of Diesel Engine Concrete Pump: How to solve the problem of glasses plate and cutting ring? For diesel concrete pump, the most basic method for operators to deal with concrete segregation: 1. First anti-pump, after the positive pump, so lasting 2-3 times, it should be resolved, if still can not be resolved, then can not be positive, anti-pump. Otherwise, the concrete at the separation of the pipe concrete is getting tighter and tighter, and there is no way to make underwater concrete.

A:Positive and negative pumps of trailer diesel concrete pump observe the pressure gauge, the pressure is 0, and the system is pressureless. The DT1 solenoid valve was detected to be normal and the spool was manually placed. The fault still exists. It is suspected that the safety valve spool of trailer diesel concrete pump is stuck, the top cover is removed and the valve core is removed, and the up and down movement of the valve core is flexible and normal;

A:Yes, welcome come to our factory and technicians can show you how to operate the machine the concrete pump. Engineers are also available to service overseas.

A:We concrete pump can pump as much as 80m3 per hour.

A:The conventional 'recessed plate' press has a fixed volume which removes moisture by adding more solids.

A:The operation of a filter press is a batch process and depending on the particular application, the filter press may be used to recover either the solid particulate, the liquid stream, or both.

A:Yeah, of course, we have grout mixer, agitator and injection in one skid, the structure is very compact, suitable for small working space.

A:For Gaode grout pump, the pressure from 0-45Mpa, any question or demands, please contact us freely. Tel: +86-371-55951210

A:First, please confirm what’s the project will you use the pump do, for dam, tunnel or other? Second, please confirm what’s the pressure and capacity do you need? Third, for the engine, would you need electric motor or diesel engine with the grout pump?

A:Cycle time is dependent on solids loading and can take anywhere from 2-4 hours on average. (Closer to four hours for typical metal hydroxide waste.)

A:Cloth cleaning, dumping, check hoses and connections.

A:Concrete pumps are playing an important role in the construction concrete industry, which make the concrete faster, more convenient and time saving. Concrete pumps make the concrete run faster. Get concrete anywhere, anytime. Save on time and disruptions.

A:Yes, of course. If you have truck chassis, it will be better. After all the effluent standards are acceptable by your local government and the truck after-sales is more conveniently.

A:1) if has suitable type hose pump in stock or delivery time is only one week, the payment will be pay TT100%. 2) If the delivery time is over than two weeks, TT, 30% deposit ,70% before shipment. 3) L/C at sight (high bank charge, not suggest , but acceptable )

A:Yeah, our GH32 and GH89 hose pump has been used as grouting pump in the TBM , which made by China railway equipment.

A:Of course, if you want use the hose pump for spraying mortar or plaster, will need one small air compressor and nozzle, so it is no problem to use the hose peristaltic pump as mortar pump or plaster pump, maybe our GMP40/10-H mortar pump could meet your demands, we also could redesign for you.

A: Yeah, of course, we will according to your demands to design the hose pump with hopper.

A:Usually we have common type hose pump in stock, if no stock, for common type peristaltic pump, the deliver time is about 1-2 weeks, if customized peristaltic hose pump, the deliver time is about 2-3 weeks.

A:Gaode peristaltic hose pumps are widely applied in architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, pharmacy, and papermaking etc. field.

A:Of course, we are factory and has our own technical department, could redesign new peristaltic pump according to your demands.

A:Of course. we can offer pump head without gearbox and electric motor. And also can make OEM for you.

A:in order to offer right type hose peristaltic pump, we need to make clear the following points: 1） what's project will use the hos pump do, for grouting, pumping, spraying or others?

A:The squeeze hose is the only consumption part of hose peristaltic pump. Now we have three types hose for option: Chinese hose, Britain hose, and Trelleborg hose.