JBT40 P2 Electric concrete mixer pump is combined by the traditional concrete pump and the mixer together. JBT40 P2 electric power concrete pump with mixer achieves full automatic during concrete construction process.

The electric power concrete pump with mixer combines the concrete mixer and the concrete pump to realize the integration of the pumping station. It is used for houses and commercial buildings under 10 storeys, small bridges, water, electricity and communications, which are scattered and require on-site mixing. The overall layout is more scientific and the power type is more advanced, including hydraulic, electric, and oil pumps. With fast and flexible, easy to move, fast, labor-saving and other advantages.

1. Electric concrete mixer pump can convey greening soil in ecological environment construction.
2. Electric concrete mixer pump can convey floor heating lightweight foamed cement, mortar, fine aggregate concrete.
3. Electric concrete mixer pump can convey all kinds of engineering construction in the plain concrete, fiber concrete.
4. Electric power concrete pump is most suitable for four to six floor buildings, especially in the group buildings, bridges and the small construction sites where need the concrete mixer at the scene.

Features of electric concrete mixer pump:
1. Double open hydraulic loops (pumping hydraulic circuit is independent of distributing hydraulic circuit) with two pumps, makes the whole hydraulic system much simpler. The reliability of the whole system is also much higher as well as the components’ life is prolonged greatly. This is convenient for judgeing and removing trouble.
1. Compact structure, flexible movement, easy operation and simple maintenance. 
2. Electric concrete mixer pump with large valve changing direction, makes the main pumping loop quick response, small leakage, good stability, high reliability and high resist contaminative capability.
3. Electric power concrete pump with remote control with high automatic degree and easy operation, saving labor cost. 
4. Electric power concrete pump with mixer is equipped with wired remote controller, easy to operate.
5. Hydraulic system has safe relief protection, at the same time, when the system pressure is over, the main oil pump cutting device makes itself be protected reliably.
6. Distributing hydraulic circuit adopts constant pressure pump, which can provide strong distributing pressure and economic energy control.
7. Cone sealing of all pipes make the pipe joints seal reliably.
8. Independent mixing system with even mixing performance and high working efficiency. 
9. The high-low pressure switch adopting cartridge valve of reduces the trouble of dismantling and installing the oil pipe.
10. Electric concrete pump adopts emulsification technology of initiative and passivity recovery integration.
11. Centralized lubrication system, low consumption of equipment parts, less maintenance cost.

Items				Units		Parameters
						JBT40 P2 electric concrete mixer pump
Whole performance of machine		Max. theo. concrete output		m3/h		40
		Stir the maximum rated feed		L		500
		Stir the maximum rated discharge		L		450
		Max. concrete pumping pressure		MPa		10
		Distribution valve type				S Valve
		Concrete cylinder diameter×stroke		mm		Ф140×1000
		Hopper capacity		L		550
		Outlet diameter		mm		Ф150
Power system		Winding motor power		kw		5.5
		Stir the motorPower		kw		4.5
		Water pump motor power		kw		0.55
		Electrical engineering power		kw		45
		Rotate speed		r/min		1480
Hydraulic system		Circuit type				Open circuit
		Pumping system pressure		MPa		28
		Mixing system pressure		MPa		6-8
		Capacity of oil tank		L		370
The biggest transportation is away from vertically (/Level)				m		120/500
Other parameters		Max. aggregate diameter		mm		Scree: 40 50
		Inside diameter of delivering pipe		mm		Ф125
		Dimensions：length×width×height		mm		4200x2300x3150
		Total weight		kg		4500