GGP400/700/80DPL-D diesel engine grout inject station is a combination of high-speed colloidal grout mixer, agitator and vertical type double plunger grout pump in one base frame.

Driving mode of GGP400/700/80DPL-D diesel engine grout inject station is diesel motor, the volume of the mixer is 400L, the volume of the agitator is 700L, and the output and pressure of the grouting pump is 80L/min@5Mpa.

High speed vortex colloidal grout mixer ensures mix quickly and evenly. Water, cement or bentonite is quickly mixed into homogeneous slurry. Then the mixed slurry was delivered to the agitator. Vertical type double plunger grout pump injects from the mixing drum (storage tank). This ensures a continuous mixing and grouting operations. What's more, the double plunger pump together with the pressure-holding system is used, so that the pump automatically stops and maintains the very little pressure impulse (1-4bar with 50bar grouting pressure) to ensure that the grouting hole is completely filled. The injection grouting plant is hydraulic drive. You can control flow rate and output of this diesel engine grout inject station. 

Grout inject station is mainly used for grouting in highway, railway, hydropower, construction, mining and other ground and underground construction projects.

Features of GGP400/700/80DPL-D Diesel engine grout inject station:

Description	Data
Grout injection station model	GGP400/700/80DPL-D
Dimensions	2400*2150*1700mm
Weight	1820kg
Diesel Engine
Power	27KW@1800rpm
Mixer
Capacity	400L
Recycling discharge	1100L/min
Suitable water/cement ratio	≥0.5:1
Agitator
Capacity	700L
Rated Rev	36rpm
Pump(vertical compact hydraulic grout pump)
Output/pressure	80L/min@5Mpa
Diameter	85mm
Stroke	220mm
Cycles	38 times/min
We could also customize grout inject station according to your demands.