YOUR POSITION:Home > News

200 ton hydraulic cylinder with electric pump for a shop press

2023-09-24 15:26:05

200 ton hydraulic cylinder with electric pump for a shop press is an electro-hydraulic jack that uses a high-pressure pump as a power source. 200 ton hydraulic cylinder for a shop press can be used for lifting equipment in industries such as heavy machinery, bridge engineering, water conservancy engineering, and port construction. It has the characteristics of large output force, light weight, and long-distance operation. Equipped with ultra-high pressure oil pump station, it can realize various types of operations such as jacking, pushing, pulling, and squeezing. In recent years, it has also been used in foundation settlement tests and static piles.

Features of 200 ton hydraulic cylinder for a shop press:

1. The piston part and the inner side of the guide cap are welded with copper. The surface of the piston rod is plated with hard chrome, and the cylinder is not pulled. Strong wear resistance.

2. The painted surface makes the corrosion resistance stronger.

3. The movable saddle can protect the plunger during work.

4. The internal safety valve prevents accidental overload.

5. All models use quick connectors.

6. The dust-proof ring reduces pollution and prolongs the service life of the hydraulic cylinder.

Hydraulic cylinder with electric pump for a shop press using precautions:

1. If the amount of oil in the pump body is insufficient, it is necessary to add working oil to the pump before it can work.

2. Estimate the lifting weight and avoid overloading.

3. Choose the 200 ton hydraulic cylinder for a shop press focus point to ensure that the center of gravity of the lifting object is perpendicular to the top surface of the jack. At the same time, it must be considered whether the ground is soft or hard with tough wood to avoid the danger of dumping during lifting.

4. After the 200 ton hydraulic cylinder for a shop press lifts the heavy object, the heavy object should be firmly supported by the tough wood in time. It is forbidden to use the jack as a support. If there is no special device, it is forbidden to use several jacks at the same time, so as to avoid the uneven load and the danger of dumping.

5. When using the 200 ton hydraulic cylinder with electric pump for a shop press, first connect the quick connector of the hand pump with the top, then select the position, and tighten the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the oil cylinder.