The structure of the high flow hose squeeze pump in Russia is composed of a circular cavity pump casing, rollers, and elastic hoses. The elastic hoses are installed in the pump casing. The hose is squeezed by the roller to form a closed cut-off point. When the roller rotates, the closing point moves with the roller, and the elastic hose will return to its natural state after the roller leaves, and a vacuum will be formed in the hose, thereby sucking in fluid. And it is squeezed out by the next roller. The peristaltic pump hose is squeezed and closed completely by the rollers, and the fluid will not flow back. Therefore, the soft-acting pump is a positive displacement pump or a positive displacement pump and a positive displacement pump (the speed is proportional to the flow rate). The fluid of the high flow hose squeeze pump only passes through the hose of the peristaltic pump, without valves and seals, and will not contact any other parts of the pump. The pumped liquid will be squeezed out by peristalsis in the pump tube, so there is no shear to the conveyed liquid, and sensitive substances can be pumped.

The hose squeeze pump in Russia is a new type of multi-functional and multi-purpose industrial pump that has absorbed foreign advanced technology. The pump has the functions of no seal, no leakage, strong self-priming ability, simple structure and convenient operation. It is suitable for conveying various viscosity, density, corrosive and abrasive fluid materials. Russia hose squeeze pump can be used in petroleum, chemical, water treatment, mining, smelting, papermaking, ceramics and other industries.

When the high flow hose squeeze pump is not in use, it should be maintained accordingly to improve its life:

1. If the high flow hose squeeze pump is not in use in the near future, the intake and exhaust valve body and working cylinder should be disassembled, cleaned, brushed with anti-rust liquid or grease, and then assembled for use.

2. Disassembly method

①Remove the intake and exhaust valve body

②Remove the two nuts on the screw at the end of the working cylinder and remove the cylinder head and cylinder barrel. Please do not damage the seals when disassembling.

The high flow hose squeeze pump in Russia has the following advantages:

1. The hose squeeze pumphas a sealed structure and will not leak or pollute.

2. The high flow hose squeeze pump adopts advanced technology and does not require any pressure roller.

3. The powerful self-priming ability and self-cleaning ability can produce positive and negative suction to the material.

4. The high flow hose squeeze pump has simple assembly, simple installation and maintenance, low maintenance cost and simple operation.

5. Pumping does not interfere with the delivery of fluids with high viscosity impurities.

6. The high flow hose squeeze pump has a long life, high head and high pressure at the pump port.

Pre:Double acting hollow hydraulic cylinder manufacturers

NEXT:Prestressed mono jack manufacturer from China

Inquiry >>

Products you need :
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :	Please enter your inquiry