Light weight concrete block production facility appeared abroad as early as possible, and its original model used impeller to rotate at high speed to make foam, so it is also called " CLC production facility ". Later, with the continuous progress of technology, the technical content of light weight concrete block production facility has been continuously improved, and new models have emerged constantly, forming different technical systems. According to the foaming principle, only high-speed impeller type, high-pressure air type and medium-low pressure type are widely used. The difference between them in the same type of machine is only the difference in accessory equipment and automation control, and the structure of foaming part is roughly the same.

The principle of light weight concrete block production facility is to introduce external air into the aqueous solution of foaming agent. It uses advanced methods to fully introduce external air into the aqueous solution. It cannot generate foam out of thin air. It can introduce air into the foaming agent and spread it evenly, so that the liquid can contact with the gas as much as possible, thus exciting the surface active substances in the foaming agent, and forming an electric double layer on its surface to surround the air, thus forming one foam after another. The main part of foam concrete is foam, so the light weight concrete block production facility for making foam has become a key equipment in the production process of foam concrete. Without it, foam concrete cannot be made. The main characteristics of light weight concrete block production facility are fire insulation, light weight, earthquake resistance, sound insulation, convenience in construction process, high working efficiency, strong compressive strength, innocuity, environmental protection and energy saving, and long service life. Therefore, it is precisely because of these advantages and its foam production performance that it has won praise from many users.

Gaodetec has more than ten years' experience in R&D and production of CLC production facility, and will introduce you how to judge the product performance of CLC production facility.

1. The average of foam, foam production must be average, bubble diameter spread narrow.

The light weight concrete block production facility meets the technical requirements of foam averaging, and the more average the better. Although we can't ask that the bubble diameters of all bubbles are complete and equal, we should also ask that most bubble diameters are similar or the same, and the narrower the spreading range, the better. If the light weight concrete block production facility can't do this, it indicates that its foaming performance is not ideal.

2. The fineness of foam means that the foam produced should be fine and dense.

High performance light weight concrete block production facility can produce foam as fine as cotton. It is easy for light weight concrete block production facility to make big foam, but it needs technology to make fine foam. Therefore, fine foam is also the performance of good performance of light weight concrete block production facility.

3. Foam exudes water, with low foam exudation rate and no milk foam.

The high exudation rate of foam means that a large amount of water is secreted after the foam disappears completely. The higher the bleeding rate, the worse the foam quality. If the CLC production facility always produces milk foam with more water and less foam and high bleeding, this kind of CLC production facility does not meet the technical requirements and cannot be selected.