Slurry pump for mine is a pump used to pump liquids containing solid particles. There are many designs and configurations of mud pumps to adapt to a variety of slurries. The solid concentration, solid particle size, solid particle shape and solution composition of these slurries will change. Mud pumps are stronger than liquid pumps. They added sacrificial materials and replaceable wearing parts to resist wear.

Slurry pump for mine project are widely used in the transportation of abrasive solids in the mining industry. They are usually designed for heavy and heavy uses. Depending on the mining process, some slurries are corrosive because corrosion-resistant materials like stainless steel are softer than high-speed steel. The most common metal alloy used in the manufacture of slurry pumps is called "high chromium", which is basically white iron, and 25% chromium is added to make it brittle. Rubber wire sleeves are also used in certain applications where the solid particles are small.

Benefits of slurry Pump for mine applications:

Easy maintenance.

Low capital costs.

Simple mechanism.

Robust machinery.

Stainless steel material to reduce wear and tear.

The main working parts of the slurry pump for mine are the impeller and the casing. The impeller device in the housing is located on the shaft and connected with the prime mover as a whole. When the impeller drives the impeller to rotate, the blades in the impeller will force the fluid to rotate. The blades act on the fluid in the direction of its movement, and then force the pressure potential energy and kinetic energy of the fluid to be added. At the same time, under the action of inertial force, the fluid flows from the center of the impeller to the edge of the impeller. This process is called pressurized water process. Since the fluid in the center of the impeller flows to the edge, a low-pressure area is formed in the center of the impeller. When it has a satisfactory degree of vacuum, under the effect of the pressure at the suction end (usually atmospheric pressure), the fluid enters the impeller through the suction chamber. This process is called the water absorption process. Because the impeller continuously rotates, the fluid is continuously discharged and sucked, which constitutes continuous operation.

Slurry is usually classified according to solids concentration. The engineering classification of mud is more complicated, involving concentration, particle size, shape and weight to determine the severity of wear. For the engineering selection of mud pumps, the mud is divided into level 1, level 2, level 3 and level 4.

Choosing mud pumps is much more difficult than choosing water and liquid pumps. Many factors and corrections of the duty cycle affect brake horsepower and wear. The circumferential speed of the impeller is one of the main characteristics and classification of slurry pumps. The speed must meet the classification of slurry type in order to maintain a reasonable service life due to the high abrasiveness of solids.

We have a variety of slurry pumps with different structures and outputs. If you are interested in our slurry pump for mine, please contact us, email address: info@gaodetec.com. We will provide you with the most suitable products.

Pre:Hydro seeding machine used for stone slope & high and steep slope

NEXT:Tensioning and stressing equipment for girders and concrete pile

Inquiry >>