Lightweight concrete wall panel foaming machine for sale

As an experienced lightweight wall panel foaming machine supplier, we have rich experience in making lightweight concrete wall panels. We have make lightweight wall panel machine for 10 years.
Our lightweight wall panel machine has been exported to many countries, such as, South Africa, Thailand, Philippines, The United States, etc.

When winter arrives, the weather is cold, which has a great impact on the solidification time of foam concrete and concrete strength.
1. When transporting foam concrete, it is necessary to arrange transportation vehicles reasonably. It is necessary to keep the construction site from being pressed as much as possible. After transporting to the site, it is necessary to organize the pouring as soon as possible.
2. Before the foam concrete is built, the snow and dirt on the formwork and the steel bars should be removed.
At the same time, according to the characteristics of the construction site, the concrete with low slump should be used as much as possible, which is beneficial to improve the early strength and speed up the construction progress.
It is forbidden to add water to the foam concrete truck body at the construction site to avoid quality problems.
3. Because the temperature in winter is low, do not sprinkle water on the surface during the process of collecting the foam concrete.
The surface cannot be watered during negative temperature maintenance. After the secondary compaction, it should be covered with a film, covered with a straw bag, and stored in heat storage.
4. Before the foam concrete strength reaches 1.2N/mm2, it is not possible to step on or install the template or bracket. Do not accumulate loads on the foam concrete until the strength reaches 5N/mm2 to avoid causing early cracks.

Our lightweight concrete wall panel foaming machine is composed of 2 machines: foam concrete machine and wall panel machine, foam concrete machine is used for making foam concrete, wall panel machine is used to shape wall panels.